Airwave and pedal setup
For the best hand-tracking performance:
- Align Airwave centrally, flush with the back edge of Montage
- Raise Airwave approximately 7 inches (18cm)
- If using Montage on an X-stand, we recommend placing Airwave on a flat studio monitor stand.
- If using Montage on a tabletop surface, we recommend placing Airwave on a flat laptop stand.
- Connect the sustain pedal directly to Montage (not Airwave); Airwave does not pass sustain messages to Montage.
Software setup
1. Download ROLI Connect from roli.com/start.
2. Sign in to ROLI Connect using an existing ROLI account, or by creating a new one.
3. Connect Airwave to your computer via USB
4. Register Airwave by clicking the Devices tab, and then “Register”.
5. Download ROLI Airwave Control from the Apps tab in ROLI Connect.
6. Download ROLI Airwave Player from the Apps tab in ROLI Connect.
7. Open ROLI Airwave Player and follow the Getting Started instructions on screen to complete the setup. During the calibration procedure, ensure that you select “MONTAGE Port1”.
Please see the full ROLI Airwave User Manual for more information:
Loading Airwave sounds to Montage
1. Insert the supplied USB stick into USB TO DEVICE.
2. On Montage M: UTILITY → Contents → Load → Content Type: Library File → select .Y2L → Load → choose a Library slot. (User files: .Y2U, choose User File.)
3. Find the Performances via Category Search → Bank = MONTAGE x Airwave.