To ensure proper operation of your Blocks, you will want to make sure you are charging them properly.
The Lightpad Block and Seaboard Block each has a USB type C port and comes with a USB type C to USB type A cable for charging.
The Live, Loop and Touch Blocks charge through DNA connection to a Lightpad Block or Seaboard Block. Live, Loop and Touch Blocks can be connected to NOISE separately but require the Lightpad Block or Seaboard Block to charge.
When charging a Lightpad Block or Seaboard Block we recommend using a 5 volt/1 amp USB 3 charger. If you are charging a Live, Loop or Touch Block along with your Lightpad Block or Seaboard Block, we recommend using a 5 volt/3 amp USB charger.
We recommend charging your Lightpad Block or Seaboard Block with the ROLI supplied USB cable connected to:
- The USB 3.0 port of your computer; or
- An iPad charger
BLOCKS can be charged even when they are turned off. When turned on, the Power LED on the Power / Bluetooth button indicates the current battery status of the Lightpad Block or Seaboard Block and when the Lightpad Block or Seaboard Block is being charged.
The Power LED will display green when fully charged, yellow when partially charged and red when the charge is below 20%. The Power LED flashes when the Block is being charged and is solid when not charging.