The SWAM engine is a platform developed by Audio Modeling for their SWAM-based instruments. It is extremely compatible with the Seaboard RISE and GRAND and easy to set up.



ROLI Dashboard Settings

Ensure that the MIDI Settings in ROLI Dashboard are set as shown below.



We have selected:

  • MIDI Mode: MPE
  • MPE Zone: Lower
  • No. MIDI Channels: 15
  • Pitch Bend Range: 48

Note: SWAM instruments earlier than Woodwinds 2.8.0 and Solo Strings 2.0.0 have a maximum pitch bend range of 12 semitones. If you're using one of these older versions, set ROLI Dashboard's "Pitch Bend Range" to 12 semitones. We recommended updating SWAM to the latest version at my.audiomodeling.com.


Setting SWAM to respond to the Seaboard’s dimensions of touch


SWAM is able to receive and respond to the Seaboard's dimensions of touch automatically:

  • Open the SWAM instrument
  • Click “Reset” 
  • Select “Default Seaboard”
  • Start playing your Seaboard!

If you're using an older version of SWAM or would like to manually assign the dimensions of touch, read on.


The most common modulation in SWAM is called "Expression." SWAM will want you to assign a controller to this before producing any sound.


In this example, we'll assign the Seaboard's Press (transmitted as Aftertouch) to SWAM's Expression.

Click on Options  → MIDI Mappings  → Assign AT (Aftertouch) next to Expression


SWAM assign AT


Glide

Glide is transmitted as pitch bend. Earlier we set the Seaboard's pitch bend range to 48 semitones in ROLI Dashboard, so now we will do the same in SWAM so that the pitch bend range matches.


To set SWAM's pitch bend range:


SWAGlide



Note: this image shows a pitch bend range of 12 semitones, suitable for SWAM instruments earlier than Woodwinds 2.8.0 and Solo Strings 2.0.0. If you're using a recent version, instead set ROLI Dashboard's "Pitch Bend Range" to 48 semitones.


Additional controllers

Mapping other controllers to parameters in SWAM is performed in the same way as Press at the start of this article. Go to: Options  → MIDI Mappings 

Each parameter has a drop down menu. Simply select the input that should affect that parameter.


For example, Slide is transmitted as MIDI CC 74. To assign Slide to "Bow Position", select CC 74 in the drop-down box next to "Bow Position".


SWAM slide

Click here to see the full list of messages being sent by the Seaboard.