The Live Block makes playing in NOISE faster and easier by controlling its functionality through the push of a button!

Press the Live Block’s two leftmost buttons to the turn the Live Block on and check this guide to connect it to NOISE via Bluetooth.

Then start playing and use your Live Block to enhance NOISE’s capabilities!

Learn more about playing in NOISE with this guide.

Live Block wire frame

A) Mode: switch between the Drum Kit and Solo instruments

B) Volume: press and use the Plus / Minus button below to adjust NOISE’s volume

C) Scale: press to turn Scale ‘On’ and ‘Off’. When ‘On’, use the Plus / Minus button below to toggle through Scale’s options.

D) Chord: press to turn Chord ‘On’ and ‘Off’. When ‘On’, use the Plus / Minus button below to toggle through Chord’s options.

E) Arp: press to turn Arp ‘On’ and ‘Off’. When ‘On’, use the Plus / Minus button below to toggle through Arp’s options.

F) Sustain: press to activate / de-activate making a note linger after you lift your finger – just like a sustain pedal on a piano!

G) Octave: press and use the Plus / Minus button below to adjust NOISE’s octave, i.e., how high or low the notes you can play are

H) Love: press to store your favorite sound presets!

Live and Loop Blocks require a Lightpad Block to function.

Live and Loop Blocks can be connected to NOISE separately but still require a Lightpad Block to charge.